Ellis Holding Power Logo

VULCAN+™ TREFOIL

Data sheet DS03E

Vulcan+ Trefoil

Vulcan+ Trefoil

Side view

Side view

Trefoil formation

Trefoil formation
  • Standard duty cable cleat for trefoil cable formation

  • Cable range of Ø10mm – Ø101mm

  • 316L stainless steel frame with A4-70 stainless steel captive closure fixings

  • Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus Free polymeric liners for increased cable protection

  • Fixing options: one or two M10 fixings (cleat size dependent as listed in table)

  • ABS and DNV type approved and UL listed

  • Designed, tested and manufactured in accordance with IEC 61914

Part No. Cable Range Dimensions (mm) Weight (g)
Min Ø (mm) Max Ø (mm) W Max D ±1 H ±5 P ±0.5 Fixing Holes (D1)
VRT+00C 10 15 57 56 94 N/A 1 x M10 276
VRT+00A 15 18 60 54 93 N/A 1 x M10 287
VRT+00 19 24 60 54 92 N/A 1 x M10 251
VRT+01 23 28 66 54 100 N/A 1 x M10 258
VRT+02 27 32 74 54 108 N/A 1 x M10 269
VRT+03 30 35 80 54 113 N/A 1 x M10 279
VRT+04 33 38 86 54 119 N/A 1 x M10 284
VRT+05 36 42 94 54 125 N/A 1 x M10 319
VRT+06 40 46 102 54 134 N/A 1 x M10 331
VRT+07 44 50 110 54 140 N/A 1 x M10 391
VRT+08 48 55 120 54 151 N/A 1 x M10 405
VRT+09 51 58 126 54 156 N/A 1 x M10 411
VRT+10 55 62 134 54 162 50 3 x M10 442
VRT+11 59 66 142 54 168 50 3 x M10 453
VRT+12 63 70 150 54 178 50 3 x M10 460
VRT+13 67 74 158 54 185 75 3 x M10 524
VRT+14 71 78 166 54 196 75 3 x M10 536
VRT+15 74 82 174 54 202 75 3 x M10 542
VRT+16 77 85 180 54 206 75 3 x M10 544
VRT+17 81 89 188 54 212 75 3 x M10 618
VRT+18 85 93 196 54 217 75 3 x M10 628
VRT+19 89 97 204 54 222 75 3 x M10 637
VRT+20 93 101 212 54 230 75 3 x M10 646
Ellis Holding Power Logo

VULCAN+™ TREFOIL

Data sheet DS03E

Testing Summary

Vulcan+ Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC 61914. Typical results are detailed below, please note that these testing values are maximums and safety factors appropriate to your application should be used:

Property Classification Clause IEC 61914 Units / Classification Test Data
Cleat type 6.1.3 Composite -
Temp. for permanent application 6.2 °C -40 to +60
UV resistance 6.5.1.2 Xenon arc method A Pass
Corrosion resistance 6.5.2.2 High 316L stainless steel has ≥16% chromium
Impact rating 6.3.4 Very heavy Pass
Flame propagation test 10.0, 10.1 Application time ≥30s Pass
Axial load rating 6.4.3, 9.4 Newtons (N) 280N - Trefoil (VRT+00C/A = 80N)
Lateral load rating 6.4.2, 9.3 Newtons (N) Horizontal - 200N (VRT+00C = 180N) Vertical - 650N
Resistance to electromechanical force (short circuit testing) 6.4, 6.4.5, 9.5 Cleats at 300mm intervals (withstanding more than one short circuit) 135kA (Report No. LCOE 2025 09 35 0695-7) Cable OD= Ø35.5mm
Resistance to electromechanical force (short circuit testing) 6.4, 6.4.5, 9.5 Cleats at 600mm intervals (withstanding more than one short circuit) 116kA (Report No. LCOE 2025 09 35 0695-8) Cable OD= Ø35.7mm

Lateral load: vertical direction

Lateral load: vertical direction

Lateral load: horizontal direction

Lateral load: horizontal direction
DNV

Listed sizes: VRT+00 to VRT+20

ABS Type Approved Product
UL Listed

Conduit & cable hardware 4CG8 with AH-2 & wet locations. Listed sizes: VRT+00 to VRT+18.

London Underground

Vulcan+ Cable Cleats are compliant with the requiremnts of LUL-1085. Product register number 361.