MATRIX™
Data sheet DS12E
Matrix
Multiple cable detail
Multiple cable formation
Light Duty Galvanised Steel & Polymer Cable Cleat for multiple cables
Cleat design allows multiple cables to be assembled in a matrix style
For cables ranges Ø20–70mm
Hot-dipped galvanised steel frame
Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus Free polymeric pads for increased cable protection
Closure fixing: A4-70 stainless steel
Designed, tested and manufactured in accordance with IEC 61914
Testing Summary
Matrix has been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC 61914. Typical results are detailed below, please note that these testing values are maximums and safety factors appropriate to your application should be used:
| Property | Classification Clause IEC 61914 | Units / Classification | Test Data |
|---|---|---|---|
| Cleat type | 6.1.3 | Composite | |
| Temp. for permanent application | 6.2 | °C | -40 to +60 |
| UV resistance | 6.5.1.2 | Refer to Ellis | |
| Impact rating | 6.3.5 | Very heavy | Pass |
| Flame propagation test | 10.0, 10.1 | Application time ≥30s | Pass |
| Axial load rating | 6.4.3, 9.4 | Newtons (N) | Refer to Ellis |
| Lateral load rating | 6.4.2, 9.3 | Newtons (N) | Refer to Ellis |
| Resistance to electromechanical force (short circuit testing) | 6.4, 6.4.4, 9.5 | Cleats at 300mm intervals (withstanding more than one short circuit) | 91.3kA (Report No. PDL-18.071.2) Phase spacing = Ø45mm (MC-4x1-037-G) |