View Related PDF Files
Print this page
Back to previous pageCable Cleat Accessories
Framing Channel Washer
It is always recommended that the framing channel washer is used when cleating
2H series two hole cable clamps to framing channel.
| Part No. |
Size | Material Suffix |
Hole Size mm |
Pack Qty |
Weight g |
| 91-WZ | 40 x 40 | Mild Steel Zinc Plated | 10 | 100 | 33 |
| 91-WZ-X | 40 x 40 | Mild Steel Zinc Plated | 12 | 100 | 33 |
| 91-W-2 | 40 x 40 | A2 Stainless Steel | 10 | 100 | 34 |
| 91-W-4 | 40 x 40 | A4 Stainless Steel | 12 | 100 | 34 |
| 91-WG | 40 x 40 | Mild Steel Galvanised | 10 | 100 | 37 |
Trunking Adaptor
Available in Black Polypropylene or Nylon LSF. This maybe used to fit one hole and two hole cable clamps when cables are being installed parallel to the trunking.
| Part No. |
Material Suffix |
Pack Qty |
Weight g |
| 91-TA | B | 100 | 5.3 |
| 91-TA | LSF | 100 | 7.1 |
Insulation Plate
Available in Black Polyproylene this insulation plate can be used to provide a barrier where galvanic reaction may occur between dissimilar metals, e.g. when installing stainless steel cleats onto galvanised steel channel..
| Part No. |
Material Suffix |
Pack Qty |
Weight g |
| 91-IP | B | 100 | 5 |
Studs suitable for One & Two Hole Cableclamps
| Part No. |
Material Suffix |
Pack Qty |
Weight g |
| 0F-M10-100A-Z | M10 x 100 Althread stud | 50 | 48 |
| 0F-M10-125A-Z | M10 x 125 Althread stud | 50 | 60 |
| 0F-M10-150A-Z | M10 x 150 Althread stud | 50 | 73 |
| 0F-M10-225A-Z | M10 x 225 Althread stud | 50 | 108 |
All fixings supplied in Bright Zinc Plated Mild Steel
Nut
| Part No. |
Material Suffix |
Pack Qty |
Weight g |
| 0F-M10-FNUT-Z | M10 Hexagon Full Nut | 100 | 10.5 |
All fixings supplied in Bright Zinc Plated Mild Steel
Washer
| Part No. |
Material Suffix |
Pack Qty |
Weight g |
| 0F-M10-W002-Z | M10 Flat Washer | 100 | 2.1 |
All fixings supplied in Bright Zinc Plated Mild Steel
Channel nuts
| Part No. |
Material Suffix |
Pack Qty |
Weight g |
| 0F-M10-CN00-Z | M10 Channel nut (long spring) | 100 | 38 |
| 0F-M10-CN01-Z | M10 Channel nut (short spring) | 100 | 37 |
| 0F-M10-CN02-Z | M10 Channel nut (no spring) | 100 | 36 |
All fixings supplied in Bright Zinc Plated Mild Steel